Catalytic reforming converts low-octane heavy naphtha (typically research octane number 40 to 60) into a high-octane, aromatic-rich reformate for gasoline blending or aromatics production, and produces hydrogen that the refinery's hydrotreaters need. This guide covers the reactions, why reformers use several reactors with reheating, the hydrogen balance, catalyst deactivation and the severity trade-off, using one synthetic example. It also corrects a unit-conversion slip and an octane premium error that reversed the conclusion of a common worked example.

1. Reactions
- Naphthene dehydrogenation (cyclohexane → benzene + 3 H2, ΔH ≈ +206 kJ/mol): fast, strongly endothermic, favoured by high temperature and low pressure.
- Paraffin dehydrocyclization (n-heptane → toluene + 4 H2, ΔH ≈ +238 kJ/mol from standard enthalpies of formation): slow, the key octane-making reaction, needs both metal and acid sites.
- Isomerization: mildly exothermic, raises paraffin octane (n-pentane RON about 62, isopentane about 92).
- Hydrocracking: exothermic, consumes hydrogen and converts liquid into gas; increases with temperature.
Coke forms as a by-product and deactivates the catalyst; high hydrogen partial pressure slows coking but also limits aromatization. Most operating choices are a compromise between these effects.
2. Hydrogen balance
Synthetic feed: 12,500 BPSD of heavy naphtha, density 770 kg/m³, average molecular weight 140, containing 35 mol% naphthenes, 52% paraffins and 13% aromatics (mole fractions approximated by volume fractions). Assume 85% of naphthenes and 30% of paraffins become aromatics and 8% of paraffins are hydrocracked. Per 100 kg of feed (714 mol):
H2 = 212.5 × 3 + 111.4 × 4 − 29.7 × 1 = 1,054 mol ≈ 2.1 kg, or 2.1 wt% of feed
Feed mass flow = 12,500 × 0.159 × 770 / 86,400 = 17.7 kg/s (not 22.4 kg/s as sometimes miscalculated), so the unit produces about 0.37 kg/s of hydrogen, 1,340 kg/h or 11,800 t/year. At an assumed internal value of $3/kg this is worth about $35 million per year. The hydrogen leaves in the net gas, together with light hydrocarbons, and its purity depends on pressure and severity.
3. Why several reactors with interheaters
Because the main reactions absorb heat, the temperature falls through each adiabatic bed. Synthetic first reactor: 70% of the naphthene conversion occurs there, absorbing 149 × 205 kJ = 30.5 MJ per 100 kg of feed. The heat comes from both the hydrocarbon vapor (100 kg × 2.4 kJ/kg/°C = 240 kJ/°C) and the recycle hydrogen: at 5 mol H2 per mol of hydrocarbon, 3,571 mol or 7.1 kg of hydrogen with cp ≈ 14.5 kJ/kg/°C adds 104 kJ/°C.
ΔT1 = 30,500 / (240 + 104) ≈ 89°C, so 510°C at the inlet gives about 421°C at the outlet
Ignoring the recycle gas would give a 127°C drop. Later reactors see smaller drops (assumed 80, 45 and 30°C) because fewer naphthenes remain and the slower reactions dominate, which is also why catalyst is distributed unevenly (assumed 10, 15, 25 and 50% of the inventory in reactors 1 to 4). With interheaters restoring 510°C at each inlet, the weighted average bed temperature, using the mean of inlet and outlet in each bed, is about 486°C. Operators raise inlet temperatures through the cycle to keep octane constant as the catalyst deactivates.
4. Operating variables
| Change | Octane | Reformate (C5+) yield | Hydrogen | Catalyst life |
|---|---|---|---|---|
| Higher temperature | Higher | Lower (more cracking) | Higher | Shorter |
| Lower pressure | Higher | Higher (less cracking) | Higher | Shorter (more coke) |
| Higher H2/hydrocarbon ratio | Slightly lower | Similar | Lower net export | Longer |
5. Catalyst and deactivation
Reforming catalysts are bifunctional: platinum (with rhenium in semi-regenerative units, or tin in continuous units) provides the metal function, and chlorided alumina the acid function. Chloride must be kept in balance by injection, because it is stripped by water in the feed.
- Coke builds up during the run and is burned off during regeneration.
- Platinum agglomeration at high temperature reduces activity; oxychlorination during regeneration redisperses the metal.
- Poisons: sulfur and nitrogen must be removed in the naphtha hydrotreater (feed sulfur is commonly limited to below about 0.5 ppm), and metals such as arsenic and lead poison the catalyst permanently.
Cycle length example. Start-of-run WABT 484°C, allowable end-of-run WABT 530°C, observed deactivation 2.0°C per month: cycle length ≈ (530 − 484) / 2.0 = 23 months. In a semi-regenerative unit the reactors are then shut down for a regeneration (coke burn with dilute oxygen, oxychlorination, reduction), typically lasting several days. A continuous catalytic reformer (CCR) circulates the catalyst through a separate regenerator, so it can run at low pressure and high severity continuously, with higher octane and more hydrogen, at the cost of a more complex unit.
6. Severity economics: check every number
Synthetic assumptions: reformate worth $82/bbl at RON 92 plus $0.40/bbl for each RON point above 92; hydrogen $3/kg; yields of 86.0 vol% reformate and 1.9 wt% hydrogen at RON 95, and 84.0 vol% and 2.1 wt% at RON 97.
- RON 95: 10,750 bbl/d × $83.20 + 29,075 kg/d × $3 = $981,624/day
- RON 97: 10,500 bbl/d × $84.00 + 32,135 kg/d × $3 = $978,406/day
Under these assumptions RON 95 is better by about $3,200/day, or $1.2 million per year, before counting the shorter catalyst cycle at RON 97 (about 0.5 more regenerations over ten years). Counting the premium from the wrong baseline (seven RON points instead of five at RON 97) would reverse the answer. In a real refinery, the value of octane is not a fixed premium: it comes from the gasoline blending model, which shows how much reformate octane lets the refinery upgrade other components or meet specifications.
References
- G.J. Antos and A.M. Aitani (eds.), Catalytic Naphtha Reforming, 2nd ed. (Marcel Dekker, 2004)
- J.H. Gary, G.E. Handwerk and M.J. Kaiser, Petroleum Refining: Technology and Economics, 5th ed. (CRC Press, 2007). Reaction enthalpies from standard enthalpies of formation
Related reading and community
Questions or field experience to share? Join the PetroSmart Telegram group, watch worked examples on the PetroSmart Academy YouTube channel and follow us on Facebook.